Boss SD-2 Dual Overdrive Pedal (Boss un kendi sitesinden alıntı)
The SD-2 contains two indipendent overdrive circuits providing two different modes of operation. The LEAD mode produces a thick, smooth sound while the CRUNCH mode produces a fat, crunchy sound. There's also a LEAD/CRUNCH mode where you can alternate between the two modes each time you step on the pedal. The pedal uses concentric potentiometers for Level, Tone and Drive so it's possible to keep completely separate settings each mode. When in CRUNCH mode, a latching foot switch can be connected to the remote input. This footswitch will then switch between LEAD and CRUNCH mode while the main pedal switch will turn the effect on or off.
Features
Indipendent over drive circuits for LEAD and CRUNCH
Both overdrive circuits in the SD-2 are using LEDs as clipping diodes.
Two colour LED (Red for LEAD, green for CRUNCH) indicates operation mode
Connection for optional footswitch like the FS-5L
Specifications
Controls: Level, Tone, Drive, 3-way Mode switch
Connectors: Input, Remote, Output, AC Adaptor
Current Draw: 21 mA (DC 9V)
Recommended AC Adaptor: PSA Series
Labels
Silver - Made In Taiwan
The SD-2 was sold from April 1993 to December 1998.
Pedal kutuludur. Üzerindeki boyasıyla ilgili birkaç kozmetik sıkıntısından başka hiçbir şeyi yoktur. Evde yıllardır boş boş durduğundan ve artık kullanmadığımdan dolayı satışa çıkardım. Sanalpazar sitesinden taksitle satın alabilirsiniz. Ayrıca fotoğrafları da sanalpazar da mevcuttur.
http://www.sanalpazar.com/Boss-Sd-2-...l__isp26708308
The SD-2 contains two indipendent overdrive circuits providing two different modes of operation. The LEAD mode produces a thick, smooth sound while the CRUNCH mode produces a fat, crunchy sound. There's also a LEAD/CRUNCH mode where you can alternate between the two modes each time you step on the pedal. The pedal uses concentric potentiometers for Level, Tone and Drive so it's possible to keep completely separate settings each mode. When in CRUNCH mode, a latching foot switch can be connected to the remote input. This footswitch will then switch between LEAD and CRUNCH mode while the main pedal switch will turn the effect on or off.
Features
Indipendent over drive circuits for LEAD and CRUNCH
Both overdrive circuits in the SD-2 are using LEDs as clipping diodes.
Two colour LED (Red for LEAD, green for CRUNCH) indicates operation mode
Connection for optional footswitch like the FS-5L
Specifications
Controls: Level, Tone, Drive, 3-way Mode switch
Connectors: Input, Remote, Output, AC Adaptor
Current Draw: 21 mA (DC 9V)
Recommended AC Adaptor: PSA Series
Labels
Silver - Made In Taiwan
The SD-2 was sold from April 1993 to December 1998.
Pedal kutuludur. Üzerindeki boyasıyla ilgili birkaç kozmetik sıkıntısından başka hiçbir şeyi yoktur. Evde yıllardır boş boş durduğundan ve artık kullanmadığımdan dolayı satışa çıkardım. Sanalpazar sitesinden taksitle satın alabilirsiniz. Ayrıca fotoğrafları da sanalpazar da mevcuttur.
http://www.sanalpazar.com/Boss-Sd-2-...l__isp26708308
Yorum